Heavy Equipment

• Name: Crawler Excavator
• Model :NT30
• Bucket capacity  0.08m³
• Engine:Kubota1105,18.2kw
• Fuel form:Diesel
• Walking speed:2.6Km/h
• Rotation speed:10r/min
• Total length:4080mm
• Total width:1350mm
• Total height:2200mm
• Crawler length:1900mm
• Crawler width:230mm
• Body width:1060mm
• Maximum digging height:3710mm
• Maximum dumping height:2480mm
• Maximum digging depth:2250mm
• Maximum digging radius:4020mm
• Platform clearance to ground:458mm
• Swing angle:360°
• Climbing gradient:30°

Warranty:

• 1 Year Warranty Offered. We pride ourselves on our customer service, in the unlikely event if you have any concerns please feel free to contact us to resolve any problems before leaving negative feedback. Thanks for your understanding.

Notes:

• Please note that we have 3 brands TOPCAT, MOWER KING, AGROTK, products of these 3 brands are totally exactly the same. Please note that the we will ship the brand at random. The carrier may changed to your local logistics if you’re in remote area. 

Shipping:

• If you’re in a remote area, the carrier may be changed to your local logistics.  
• Please do not hesitate to contact us via ebay message if eBay shows that your order has been received while you didn’t. We will do our effort to help you fix the problem.
• Your orders will be shipped within 3 working days after you pay. Usually it will takes nearly 10 working days to your place. 
• If you have any needs for local pick up, please feel free to email us for detail information. 

PLEASE MAKE SURE THAT YOU HAVE A FORFLIFT FOR UNLOADING BEFORE YOU PURCHASE, THANKS.

.Those who drive this machine for the first time, please run at low speed before getting used to the operation.

2.You should sit in the driver’s seat and perform correct operation (looking around, jumping on, off, etc.), please do not let anyone other than the driver ride. Do not sit on the bucket.

3.Do not use it for other purposes.

Otherwise, it will not only cause the

body to malfunction, but also may cause unexpected accidents.

4.When moving the machine, please fully check whether there are people or obstacles around before proceeding. During the operation, no one is allowed to enter the operation area.

5.When operating in places with poor vision and poor terrain, please set commanders and carry out operations according to their signals.

6.For work in places with poor front view and poor terrain, please set up commanders and operate according to the signals of the commanders.

(If the operation is negligent, it will move in the opposite direction, which is very dangerous)

7.Never turn (turn around) or cross in a sloping area, otherwise it will cause the car to roll over or tilt, which is very dangerous. Please turn on a flat ground. When going up and down, please walk along the line of maximum inclination.

8.Do not perform operations such as swinging or turning, or excavation on inclined sections, otherwise there will be a risk of overturning. When working on a sloping area as a last resort, place the machine’s foothold on a level before proceeding.

Do not drive the car on rocks or work on soft soil.

When climbing up a sloping area, if you drive the car over rocks or protrusions, or walk on uneven roads, there is a risk of overturning, so please do not climb in such places.

9.When walking and climbing, please face the swing frame and working device forward and keep the bottom of the bucket 20-40cm away from the ground, so that it can be directly lowered to the ground to ensure stable driving in the event of a dangerous situation. Please never go up and down the ramp while swinging. In addition, please never drive diagonally or horizontally on slopes above 15 degrees. Otherwise, there is a risk of overturning.

10.When going up and down the soft soil slope, if the machine body may slip, please lower the bucket immediately to brake.

11.When moving near cliffs or embankments, leave enough room or carry out appropriate measures such as reinforcement to prevent the ground from collapsing. In addition, do not approach the scene where there is a risk of falling rocks. Walking after rain is more dangerous. Do not approach cliffs or embankments unpreparedly.

12.When digging under the body, be sure to pay full attention, otherwise the vehicle will overturn due to the collapse of the ground.

13.Do not dig pits under the cliff, it is very dangerous.

The collapse of cliffs and ground will cause rocks to fall.

14.If the job site or road conditions are poor, the stability of the machine will decrease, and operating errors may cause accidents or even rollovers. Therefore, while leveling the work site, it is also necessary to level the road or walk avoiding obstacles. In addition, when walking on a bridge or building, the allowable load should be investigated, and reinforcement should be carried out if the strength is insufficient.

15.Generally speaking, the lateral direction is easier to roll over than the front and rear direction. Therefore, do not perform lateral rotation when the work device is under heavy load.

16.In the case of rain or water, wooden boards, iron plates, etc. will slip easily. Please be careful when working in such a slippery place.

17.When working in places with electrical wiring, gas pipes, water and sewage, etc., experts should be present for guidance.

18.When the bucket teeth are hung on rocks, etc., when the bucket teeth fall off the rocks, etc., the vehicle may overturn due to the reaction force. Therefore, be sure to pay full attention when working. In addition, please never walk with the bucket digging into the ground or digging with the body raised. This is very dangerous.

19.When working in a building, pay full attention to the strength of the overhead, exit, passage and floor surface.

20.About cargo lifting operations

Please never carry out cargo lifting operations, otherwise it will cause the cargo to fall or overturn, which is very dangerous.

Never use this machine to replace a crane for work.

Technical Data:

• Overall Length(When Transporting): 4485mm(176.57 inch)
• Overall Width(Transporation/Operation): 1550mm
• Total Height(During Trnsport): 2440mm
• Width of Dozer Blade(Retrantion/Extension):1550mm
• Shovel Height: 335mm
• Crawler Center Distancec: 1250mm
• Distance from Swing Center to Crawler Tail: 1030mm
• Standard TRack Show Width: 300mm
• Minimum Ground Clearance: 290mm
• Standard Bucket With(with/without edge teeth): 520(470)mm

Warranty:

• 1 Year Warranty Offered. We pride ourselves on our customer service, in the unlikely event if you have any concerns please feel free to contact us to resolve any problems before leaving negative feedback. Thanks for your understanding.

Notes:

• Please note that we have 3 brands TOPCAT, MOWER KING, AGROTK, products of these 3 brands are totally exactly the same. Please note that the we will ship the brand at random. The carrier may changed to your local logistics if you’re in remote area. Please contact us via ebay message or contact our US warehouse at 1 773-927-8098 if ebay shows delivered while you didn’t get it. Thanks.

Shipping:

• If rural area, pallet must be delivered to a commercial address or picked up at the nearest shipping hub Location.  If liftgate service is required it is an extra fee.  Delivery to home address is available for extra fee.If you’re in a remote area, the carrier may be changed to your local logistics.  
• Please do not hesitate to contact us via ebay message if eBay shows that your order has been received while you didn’t. We will do our effort to help you fix the problem.
• Your orders will be shipped within 3 working days after you pay. Usually it will takes nearly 10 working days to your place. 
• If you have any needs for local pick up, please feel free to email us for detail information. Here is the information of our US warehouse for your reference: