Applicable to 0.8-2 ton MINI excavator · 200mm bucket
Product Introduction
·Material: high-strength wear-resistant steel plate;
·Applicable models: 0.8-2 ton micro excavator, compatible with most MINI excavators;
·Structural features: narrow design, replaceable bucket teeth, lightweight design, reducing body load;
·Additional grease nipple pin
Product parameters
·Width: 200mm/7.87in
·Span: 90mm/3.54in
·Center Wheelbase: 85mm/3.35in
·Hole Diameter: 25mm/0.98in
Applicable scenarios
·Narrow trench excavation/landscape/indoor demolition/foundation repair/agricultural water conservancy/greenhouse operations/pipeline laying/ice and snow cleaning
Please note
·Regularly check the wear of the bucket teeth and replace them in time to maintain efficiency;
·Make sure that the bucket connector matches the model. If you are not sure whether this product is suitable for your excavator, please contact us through eBay and we will help you confirm;
·When you purchase a product, you should ensure that the size is appropriate and the shipping address is correct. If the size is not appropriate and you want to return the product and any logistics abnormalities caused by the wrong address, you will bear the return and shipping costs of the original order. If there are any problems with the product you received, please contact us through eBay in time. We will provide you with quality after-sales service;
Applicable to 0.8-2 ton MINI excavators·Mechanical quick connection
Product introduction
·Mechanical quick connection device (Quick Coupler) is used for mechanical quick-change connectors of mini excavators. It does not require manual disassembly of the pin shaft and can switch between different attachments in seconds, greatly improving work efficiency. Mechanical locking structure to prevent accidental falling off during operation;
·Applicable models: 0.8-2 ton mini excavators, compatible with most MINI excavators;
·Material: high-strength alloy steel
Product parameters
·Span: 90mm/3.54in
·Center Wheelbase: 85mm/3.35in
·Hole Diameter: 25mm/0.98in
Applicable scenarios
Various accessories such as buckets, ripper, rakes, etc.;
Applicable to 0.8-2 ton MINI excavators·Ripper
Product Introduction
·Ripper is a multifunctional attachment for mini excavators. It uses high-strength steel teeth to break hard soil, frozen soil, hardened layers or loose surface materials to improve the efficiency of subsequent excavation or planting. Designed specifically for 0.8-2 ton MINI excavators, it combines lightweight and durability; the sharp tooth shape design can easily cut into hard soil and clay layers. The tooth root reinforcement rib design prevents breakage or deformation.
·Material: high-strength wear-resistant steel plate;
·Applicable models: 0.8-2 ton micro excavators, compatible with most MINI excavators;
Product parameters
Length: 430mm/16.93inch
Breadth: 150mm/5.91inch
Height: 190mm/7.48inch
Span: 92mm/3.62inch
Center Wheelbase: 90mm/3.54inch
Hole Diameter: 25mm/0.98inch
Applicable scenarios
·Loosening soil in farmland: breaking up compacted soil, improving air permeability, and helping with sowing or fertilizing.
·Orchard/Nursery: loosening soil around tree roots to avoid damaging the root system.
·Greening project: soil renovation of flower beds or lawns.
·Frozen soil excavation: breaking up the surface frozen soil during winter construction to facilitate subsequent excavation.
·Foundation pretreatment: loosening the hardened ground to reduce bucket wear.
·Backfill Crushing: Loosening of compacted soil mixed with bricks after demolition.
Applicable to 0.8-2 ton MINI excavator · Rake
Product Introduction
· Rake is a multifunctional attachment designed for 0.8-2 ton mini excavators for fine work such as soil preparation, debris cleaning, and root separation. Made of high-strength steel, it is lightweight and durable, improving work efficiency;
·Material: high-strength steel;
·Applicable models: 0.8-2 ton mini excavators, compatible with most MINI excavators;
Product parameters
·Span: 90mm/3.54inch
·Center Wheelbase: 85mm/3.35inch
·Hole Diameter: 25mm/0.98inch
Applicable scenarios
·Farmland preparation: loosening the soil, removing weeds and residual crop roots.
·Orchard management: cleaning fallen leaves and branches to keep the orchard clean.
·Nursery operations: rake the nursery bed to improve planting efficiency.
·Construction site cleaning: collect gravel and construction waste to keep the site clean.
·Landscaping: level flower beds and lawns, remove debris.
·Ditch maintenance: clean silt and weeds to ensure smooth drainage.
·Mines/quarries: separate fine stones and improve screening efficiency.
Suitable for 0.8-2 ton MINI excavators · Hydraulic thumb
Product Introduction
· The hydraulic thumb clamp is a grabbing attachment designed for 0.8-2 ton mini excavators, which can achieve precise grabbing and handling operations through hydraulic system control. The special tooth shape design ensures a firm grip of all kinds of materials. Made of high-strength steel, it has excellent grip and durability, which can significantly improve the versatility and operating efficiency of small excavators;
·Material: high-strength steel;
·Applicable models: 0.8-2 ton micro excavators, compatible with most MINI excavators;
Applicable scenarios
Pipeline laying: Accurately grasp and place all kinds of pipelines
Road maintenance: Cleaning curbstones, isolation piers and other facilities
Garden construction: Transplanting trees, moving landscape stones
Waste disposal: Efficient cleaning of construction waste
Material handling: Safe transfer of bricks, steel bars and other building materials
Demolition operations: Clamping concrete blocks for crushing
Farm operations: Carrying feed bags, farm tools
Orchard management: Harvesting fruits, arranging branches
Livestock farms: Cleaning livestock manure
Emergency rescue: Quickly clean up ruins
River management: Salvage debris in the water
Industrial warehousing: Material stacking operations
Applicable to 0.8-2 ton MINI excavators·600mm Mini Excavator Tilt Bucket
Product Introduction
·Precise operation: 36° bidirectional tilt design on the left and right, the bucket angle can be adjusted without frequent movement of the fuselage
·One bucket for multiple purposes: slope shaping/groove cleaning/material collection
·Material: high-strength wear-resistant steel plate, impact-resistant and long-term use without deformation, suitable for harsh working conditions such as gravel and clay, sealed cylinder design, dust and mud prevention, and extended hydraulic system life;
·Applicable models: 0.8-2 ton mini excavators, 600mm width takes into account flexibility and loading capacity, strong passability;
·Additional grease nipple pin;
Product parameters
Length: 540mm/21.25 In
Breadth: 600mm/23.62 In
Height: 265mm/10.43 In
Shaft diameter: 25mm/0.98 In
Axle spacing: 85mm/3.35 In
Span: 92mm/3.62 In
Shaft length: 165mm/6.49 In
Left tilt angle: 36°
Right tilt angle: 36°
Applicable scenarios
·Municipal and pipeline engineering/garden and landscape construction/building foundation and small earthwork/agriculture and land reclamation/emergency repair and narrow space
Please note
·Hydraulic inspection: ensure that the pipeline connection is correct and there is no leakage;
·Load limit: overloading is strictly prohibited;
·Keep a safe distance to prevent materials from sliding;
Applicable to 0.8-2 ton MINI excavators·600mm Skeleton Screening Bucket
Product Introduction
600mm Skeleton Screening Bucket can quickly separate soil, rocks, crushed materials, construction waste, etc., and the screening efficiency is 5-10 times higher than that of manual work.
·Material: high-strength wear-resistant steel plate, high-strength skeleton structure design;
·Applicable models: 0.8-2 ton micro excavators, compatible with most MINI excavators;
·Additional pins with grease fittings;
Product parameters
Shaft diameter: 25mm/0.98 In
Axle spacing: 85mm/3.35inch
Span: 92mm/3.62 In
Shaft length: 162mm/6.37 In
Applicable scenarios
·Construction and demolition engineering/landscape/agriculture and land/mines and quarries/pipeline and cable laying
· Make sure the excavator attachment matches the model. If you are not sure whether this product is suitable for your excavator, please contact us through eBay and we will help you confirm;
 When you purchase a product, you should ensure that the size is appropriate and the shipping address is correct. If the size is not appropriate and you want to return the product and any logistics abnormalities caused by the wrong address, you will be responsible for the return and shipping costs of the original order. If there are any problems with the product you received, please contact us through eBay in time. We will provide you with high-quality after-sales service;
