Find Bargains

Applicable to 0.8-2 ton MINI excavators·Mechanical quick connection

Product introduction

·Mechanical quick connection device (Quick Coupler) is used for mechanical quick-change connectors of mini excavators. It does not require manual disassembly of the pin shaft and can switch between different attachments in seconds, greatly improving work efficiency. Mechanical locking structure to prevent accidental falling off during operation;

·Applicable models: 0.8-2 ton mini excavators, compatible with most MINI excavators;

·Material: high-strength alloy steel

Product parameters

·Span: 92mm/3.62in

·Center Wheelbase: 92mm/3.62in

·Hole Diameter: 25mm/0.98in

Applicable scenarios

Various accessories such as buckets, ripper, rakes, etc.;

Applicable to 0.8-2 ton MINI excavators·Ripper

Product Introduction

·Ripper is a multifunctional attachment for mini excavators. It uses high-strength steel teeth to break hard soil, frozen soil, hardened layers or loose surface materials to improve the efficiency of subsequent excavation or planting. Designed specifically for 0.8-2 ton MINI excavators, it combines lightweight and durability; the sharp tooth shape design can easily cut into hard soil and clay layers. The tooth root reinforcement rib design prevents breakage or deformation.

·Material: high-strength wear-resistant steel plate;

·Applicable models: 0.8-2 ton micro excavators, compatible with most MINI excavators;

Product parameters

Length: 430mm/16.93inch

Breadth: 150mm/5.91inch

Height: 190mm/7.48inch

Span: 92mm/3.62inch

Center Wheelbase: 90mm/3.54inch

Hole Diameter: 25mm/0.98inch

Applicable scenarios

·Loosening soil in farmland: breaking up compacted soil, improving air permeability, and helping with sowing or fertilizing.

·Orchard/Nursery: loosening soil around tree roots to avoid damaging the root system.

·Greening project: soil renovation of flower beds or lawns.

·Frozen soil excavation: breaking up the surface frozen soil during winter construction to facilitate subsequent excavation.

·Foundation pretreatment: loosening the hardened ground to reduce bucket wear.

·Backfill Crushing: Loosening of compacted soil mixed with bricks after demolition.

Applicable to 0.8-2 ton MINI excavator · Rake

Product Introduction

· Rake is a multifunctional attachment designed for 0.8-2 ton mini excavators for fine work such as soil preparation, debris cleaning, and root separation. Made of high-strength steel, it is lightweight and durable, improving work efficiency;

·Material: high-strength steel;

·Applicable models: 0.8-2 ton mini excavators, compatible with most MINI excavators;

Product parameters

·Span: 90mm/3.54inch

·Center Wheelbase: 85mm/3.35inch

·Hole Diameter: 25mm/0.98inch

Applicable scenarios

·Farmland preparation: loosening the soil, removing weeds and residual crop roots.

·Orchard management: cleaning fallen leaves and branches to keep the orchard clean.

·Nursery operations: rake the nursery bed to improve planting efficiency.

·Construction site cleaning: collect gravel and construction waste to keep the site clean.

·Landscaping: level flower beds and lawns, remove debris.

·Ditch maintenance: clean silt and weeds to ensure smooth drainage.

·Mines/quarries: separate fine stones and improve screening efficiency.

Applicable to 0.8-2 ton MINI excavators·600mm Mini Excavator Tilt Bucket

Product Introduction

·Precise operation: 36° bidirectional tilt design on the left and right, the bucket angle can be adjusted without frequent movement of the fuselage

·One bucket for multiple purposes: slope shaping/groove cleaning/material collection

·Material: high-strength wear-resistant steel plate, impact-resistant and long-term use without deformation, suitable for harsh working conditions such as gravel and clay, sealed cylinder design, dust and mud prevention, and extended hydraulic system life;

·Applicable models: 0.8-2 ton mini excavators, 600mm width takes into account flexibility and loading capacity, strong passability;

·Additional grease nipple pin;

Product parameters

Length: 540mm/21.25 In

Breadth: 600mm/23.62 In

Height: 265mm/10.43 In

Shaft diameter: 25mm/0.98 In

Axle spacing: 85mm/3.35 In

Span: 92mm/3.62 In

Shaft length: 165mm/6.49 In

Left tilt angle: 36°

Right tilt angle: 36°

Applicable scenarios

·Municipal and pipeline engineering/garden and landscape construction/building foundation and small earthwork/agriculture and land reclamation/emergency repair and narrow space

Please note

·Hydraulic inspection: ensure that the pipeline connection is correct and there is no leakage;

·Load limit: overloading is strictly prohibited;

·Keep a safe distance to prevent materials from sliding;

Applicable to 0.8-2 ton MINI excavators·600mm Skeleton Screening Bucket

Product Introduction

600mm Skeleton Screening Bucket can quickly separate soil, rocks, crushed materials, construction waste, etc., and the screening efficiency is 5-10 times higher than that of manual work.

·Material: high-strength wear-resistant steel plate, high-strength skeleton structure design;

·Applicable models: 0.8-2 ton micro excavators, compatible with most MINI excavators;

·Additional pins with grease fittings;

Product parameters

Shaft diameter: 25mm/0.98 In

Axle spacing: 85mm/3.35inch

Span: 92mm/3.62 In

Shaft length: 162mm/6.37 In

Applicable scenarios

·Construction and demolition engineering/landscape/agriculture and land/mines and quarries/pipeline and cable laying